WELCOME TO OUR BLOG

We're sharing knowledgein the areas which fascinate us the most
click
October 29th, 2026

What Do OEM Machine Builders Need From a Digital Readout System Manufacturer?

An OEM readout supplier is judged on the factory chain behind the console—grating master development, laser interferometer calibration, standard participation, wide-voltage power design, and the engineering documents that travel with each batch—because those are the elements that hold a production program together year after year.
October 29th, 2026

Laser Interferometer Calibration in Digital Readout Manufacturing

A digital readout is only as trustworthy as the linear scale feeding it, and that scale begins with a grating master and a laser length reference long before any console is assembled.
October 29th, 2026

All-in-one DRO Firmware for Lathe, Milling, and Grinding Modes

One DRO console can serve a lathe, a mill and a grinder, but the calculation keys that actually earn their keep change from machine to machine.
October 24th, 2026

Linear and Nonlinear Error Compensation on a Machine DRO

A machine DRO can rewrite the number it shows so the display matches the distance the table actually travelled, but only after someone measures how the axis really behaves.
October 24th, 2026

DB9 Pinout and TTL Square Wave Signals on a 3 Axis DRO

A three-axis readout only sees scale movement through the pins on each DB9 port, so knowing which pin carries power, ground, A, B, and R makes wiring faults much easier to trace.
October 24th, 2026

What Does 0.1 μm Resolution on a Digital Readout Really Mean?

A 0.1 μm display step is a useful readout feature, but it is one part of a longer measurement chain.
September 28th, 2026

Embedded Digital Readouts for Automated Measurement Fixtures

An embedded digital readout gives a measurement fixture a compact place to turn one axis of mechanical travel into a number a PLC or host controller can use.
September 28th, 2026

How TTL and RS-422 Signals Work in a Single Axis Digital Readout

A single-axis digital readout turns encoder pulses into a stable position number, and the electrical path from encoder to display decides how reliably that number tracks real machine movement.
September 28th, 2026

Single Axis DRO Probe Latching for Automated Inspection Fixtures

For an automated inspection fixture, the key question is whether a single-axis DRO can latch the exact axis position the instant a probe or foot switch fires.
September 22nd, 2026

Choosing 0.1 Micron Resolution and Error Compensation for Single-Axis DROs

Deciding between linear and non-linear error compensation and deciding whether a single-axis digital readout needs 0.1 micron resolution are two separate engineering choices that often get collapsed into one specification conversation.
September 22nd, 2026

Digital Readout System Supplier for OEM Machine Builders

OEM machine builders need a digital readout system supplier that supports integration interfaces, sample evaluation, API development, minimum order flexibility, and monthly production capacity, not just a product catalog.
September 22nd, 2026

How to Choose a Digital Readout Manufacturer for Embedded Systems

Choosing an embedded single-axis digital readout manufacturer starts with capability evidence rather than a model number, because sample builds and later batch supply depend on measurement discipline, quality systems, and production continuity.
September 1st, 2026

Global Shutter Cameras in Industrial Dimensional Measurement

A global shutter camera can reduce motion-related image distortion, but it should not be confused with complete measurement accuracy.
September 1st, 2026

Auto Zoom Lenses and Focus in Video Measurement Systems

Auto zoom changes how a vision system frames a part, while focus determines whether the edge detail is clean enough for reliable image-based measurement.
September 1st, 2026

Video Measuring Machines vs. Optical Measuring Machines in QC

Video measuring machines and optical measuring machines often sit close together in catalogs, but the name usually points to a measurement method, not a full configuration promise.
August 21st, 2026

Visual Measurement Systems for Industrial Imaging and Dimensional QC

A clear image helps operators see a part, but only a measurement chain can turn that image into a recordable size result.
August 21st, 2026

Visual Measurement Systems in PCB, Mold, and Micro Component QC

A non-contact visual measurement system is a fit when the job is mainly visible geometry, repeatable image capture, and records that can move with the part through production.
August 21st, 2026

Auto Zoom Lenses and Global Shutter Cameras in Visual Measurement Systems

Auto zoom lenses, global shutter CMOS sensors, and zone lighting only help a visual measurement system when the whole imaging chain stays stable under real integration conditions.
August 11th, 2026

Rod base friction transmission and linear guideways in optical comparators

Stable motion in an optical comparator depends on transmission, guideways, and machine body structure, not only on optics or digital readout.
August 11th, 2026

Optical profile projector for mould die screw and gear inspection

Optical profile projectors help technical teams connect visible 2D geometry with practical inspection tasks in mould, die, screw, and gear production.
August 11th, 2026

Optical comparator for mould die screw and gear measurement applications

Manufacturing teams can use an optical comparator to judge whether visible 2D geometry is the right measurement task before selecting equipment.
July 23rd, 2026

Easson as an optical comparator manufacturer and supplier for metrology teams

Metrology teams should read Easson manufacturer and supplier wording as brand and page context, not as automatic purchase terms.
July 23rd, 2026

How digital readout and lens choices affect ep series measurement reading

Lens magnification and digital readout shape how EP series users observe, read, and record 2D measurement results.
July 23rd, 2026

What optical profile projector manufacturer means for 2d measurement equipment

First-time buyers should read manufacturer wording as a signal of equipment category, measurement purpose, and product evidence.
July 8th, 2026

Evaluating the Impact of Lathe Digital Readout Systems on Machining Productivity

Integrating a 2 axis digital readout with optical scales boosts lathe setup speed and accuracy, achieving repeatability around 2μm for improved machining productivity.
July 8th, 2026

Comprehensive Overview of Glass Scale Linear Encoder Suppliers in the Market

Wholesale optical linear scales range up to 3000mm travel with ±5μm to ±25μm accuracy, ensuring precise, durable measurement for advanced industrial machining.
July 8th, 2026

Features Defining Current 2 Axis DRO for Machine Tools in Industry

A 2 axis DRO offering travel lengths from 100mm to 3000mm and resolutions of 1μm or 5μm ensures precise, reliable, and adaptable measurements for diverse machining tasks.
June 26th, 2026

Selecting the Optimal Lathe Digital Readout System for Machine Tools

Choosing a 2 axis digital readout with up to 1μm resolution and tailored installation improves machining precision, compatibility, and efficiency for reliable workshop operations.
June 26th, 2026

Insights on Glass Scale Linear Encoder Suppliers for Industrial Measurement

Easson's 2 axis digital readout glass scale encoders ensure micrometer-level accuracy with laser calibration, 72-hour aging tests, IP53 protection, and seamless lathe system integration.
June 26th, 2026

The Advantages of 2 Axis DRO for Machine Tools in Precision Manufacturing

Integrating 2 axis DRO systems with glass scale encoders offering up to 1μm resolution improves machining accuracy, durability, and workflow consistency in precision manufacturing.
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.