| NAME: | 2 Axis Digital Readout For Milling Machine | Keyword: | Mill Digital Readout Kit |
|---|---|---|---|
| Application: | Milling, Lathe, Grinder, Boring, Wirecut | Model: | ES-14 |
| Resolution: | 1µm, 5µm | Weight: | 2.5KGS |
| Power: | 110V / 220V | Output Signal: | A Qual B ( TTL ) |
Product Introduction
The ES-14 two-axis digital readout cabinet, an all-in-one function unit from Easson, was released in 2009. This model allows users to choose the specific application they need (such as Milling, Lathe, Boring, Drilling, Grinding, Wire Cutting) directly during the setup process. The ES-14 series holds CE certification and is produced under Total Quality Management (TQM) standards. Additionally, its electronic PCBs adhere to RoHS regulations.
ES-14 High Durability Switch Membrance
The Autotex is used as the key membrance of ES series, it offer excellent chemical resistance to most commonly used industry solvent and excellent switch life, switch life of expected to be 100,000 times.
Advantages of switch power unit：
1. High Efficiency: Switching power supplies are highly efficient because they only dissipate a small amount of power in the form of heat. This efficiency is due to their method of rapidly turning on and off to regulate power output.
2. Compact Size: These power supplies are generally smaller and lighter than their transformer-based counterparts due to their high frequency operation, which allows for smaller components.
3. Wide Input Voltage Range: They can handle a broader range of input voltages, making them suitable for various international applications.
4. Adjustable Output Voltage: The output voltage of a switching power supply can be easily adjusted and tightly regulated, which is beneficial for devices that require precise voltage conditions.
5. Cost-Effective: They are typically less expensive to manufacture and ship due to their lighter weight and smaller size.
6. Faster Response Time: Switching power supplies respond quicker to changes in load conditions, which can be critical in power management and protection systems.
EMC Testing
To Make sure all Easson DRO products can be pass the standard EMC standard specification, we have a complete set of EMC test esd immunity tester.
Aging Test
The purpose of conducting aging tests on products is to simulate the long-term effects of various stress factors on materials or electronic devices over an extended period, but within a shorter time frame. This testing helps assess how a product will perform throughout its expected life cycle.
Technical Specification
| Model Number | ES-14 | ||
| Axis number | Two Axis | ||
| Axis Display | 0.1μm, 0.5μm, 1μm, 5μm | ||
| Signal Input | A / B quadrature signal | ||
| Voltage Range | AC110 V - 220 V / 50Hz - 60Hz | ||
| Weight (kg) | 3.5 | ||
|
Input frequency |
2 MB Hz | ||
| Keyboard | Light touch buttons | ||
| Operating temperature | 0℃ - 45℃ | ||
| Storage temperature | -40℃ - 55℃ | ||
| Relative humidity | ≤ 95% | ||
| Inputs | 2 or 3 linear encoders | ||
| EMC Standard |
IEC61000-4-2 / GB / T 17799-2 IEC61000-4-4 / GB / T 17799-4 IEC61000-4-5 / GB / T 17799-5 |
||
Basic parameter is included as below:
| Centering (1/2) |
| Metric / inches Display (mm / Inch) |
| Raduis / Diameter for each axis |
| Power off Memory (30 subdatum) |
| 199 subdatum |
| Reference Memory (REF) |
| Clear Zero |
| Pitch Circle Diameter (PCD) |
| Line Hole Positioning (LHOLE) |
| Simple “R” Function |
| Smooth “R” Function |
| Linear Error Compensation |
| Non Linear Error Compensation |
| INCL Function |
| Axis Speed Display |
Connector interface
| PIN | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| TTL Signal | --- | 0V | --- | GND | --- | A | 5V | B | R |
| Cable | --- | Orange | --- | Ground | --- | Yellow |
FAQ
1. Who we are?
Easson has been involved in the design and production of precision measuring instruments for over two decades, specializing in CNC Video Measurement Systems, Optical Profile Projectors, Digital Readout Systems (DRO), and Linear Encoder Glass Scales.
2. How can we guarantee quality?
We are implementing the Total Quality Management (TQM) system to our factory in China more than 20 years. Strict control of production processes and quality records and labour trainning, also products aging test etc.. All this to ensure the quality assurance always be implemented throughout all the production processes.
3. Delivery time
Sea freight order normally is 30 days after receive the order comfirmation, small quantity for air freight is available to ship anytime.
4. Payment term
A: Normal accept 100% T/T payment, for others payment terms, welcome to contact for discussion.
