| Name: | Bridgeport Digital Readout | Keyword: | Digital Linear Scale |
|---|---|---|---|
| Color: | White | Shell: | Aluminum |
| Display Resolution: | 0.1µm, 0.5µm, 1µm, 5µm | Application: | Milling, Lathe, Grinding, Boring, Wire Cut |
| Power: | 110V / 220V | Output Signal: | TTL |
Product Introduction
The ES-14 series is all in one function readout system series from Easson. In the ES-14 it is in fact possible to select the required Application( Milling, Lathe, Boring, Drilling, Grinding, Wirecut) directly during the DRO setup. It also provides right to the points application specific functions for various types of general and specialised machines to achieve the highest possible machining accuracy and efficiency.
The Autotex is used as the key membrance of ES series, it offer excellent chemical resistance to most commonly used industry solvent and excellent switch life, switch life of expected to be 100,000 times.
New power supply
1. High Efficiency: Switching power supplies are highly efficient because they only dissipate a small amount of power in the form of heat. This efficiency is due to their method of rapidly turning on and off to regulate power output.
2. Compact Size: These power supplies are generally smaller and lighter than their transformer-based counterparts due to their high frequency operation, which allows for smaller components.
3. Wide Input Voltage Range: They can handle a broader range of input voltages, making them suitable for various international applications.
4. Adjustable Output Voltage: The output voltage of a switching power supply can be easily adjusted and tightly regulated, which is beneficial for devices that require precise voltage conditions.
5. Cost-Effective: They are typically less expensive to manufacture and ship due to their lighter weight and smaller size.
6. Faster Response Time: Switching power supplies respond quicker to changes in load conditions, which can be critical in power management and protection systems.
EMC Testing equipment
To Make sure all Easson DRO products can be pass the standard EMC standard specification, we have a complete set of EMC test esd immunity tester.
Aging Test
The Aging test can verify whether the process, design, material and other aspects are defective. Therefore, we can using this testing promptly revises the product design to improve product quality and service life.
Technical Specification
| Model Number | ES-14 | ||
| Axis number | 3 Axis | ||
| Axis Display | 0.1μm, 0.5μm, 1μm, 5μm | ||
| Signal Output | TTL | ||
| Voltage Range | AC110 V - 220 V / 50Hz - 60Hz | ||
| Weight (kg) | 3.5 | ||
|
Input frequency |
2 MB Hz | ||
| Operation Keyboard | Light touch buttons | ||
| Operating temperature | 0℃ - 45℃ | ||
| Storage temperature | -40℃ - 55℃ | ||
| Relative humidity | ≤ 95% | ||
| Inputs | 3 optical linear scale | ||
| EMC Standard |
IEC61000-4-2 / GB / T 17799-2 IEC61000-4-4 / GB / T 17799-4 IEC61000-4-5 / GB / T 17799-5 |
||
Basic parameter is included as below:
| Centering (1/2) |
| Metric / inches Display (mm / Inch) |
| Absolute / incremental (ABS / INC) |
| Power off Memory (30 subdatum) |
| 199 subdatum |
| Reference Memory (REF) |
| Clear Zero |
| Pitch Circle Diameter (PCD) |
| Line Hole Positioning (LHOLE) |
| Simple “R” Function |
| Inclined Machining |
| Linear Error Compensation |
| Non Linear Error Compensation |
| INCL Function |
| Axis Speed Display |
ES series DRO advanced Functions: Non-linear error compensation
Advanced functions for Milling machine
Connector interface
| PIN | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| TTL Signal | --- | 0V | --- | GND | --- | A | 5V | B | R |
| Cable | --- | Orange | --- | Ground | --- | Yellow |
